2007-2017 Jeep Wrangler JK AWD/4WD SEVERE Duty 0-6” Lift Rear Driveshaft 1350 Series

*Made-To-Order* 2-5 Day Build Time.

Conversion style shaft, 0-6" lift. 1350 Series

Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 6” Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example: [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information after you have ordered.

***If over 6” lift: Once order is placed Front and Rear Differential and Transfer Case Yokes will be shipped to you for measurements. Must measure from center of new differential yoke to flat of new transfer case yoke for both front and rear driveshafts. Once measurements are sent to Sales@ECDriveline.com, driveshafts will be made and shipped within 24 Hours. 

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

These Severe Duty Solid 1350 CV Driveshaft will work up to 44" Tall Tires.

This Item will include the following parts:

[1] 1350 Solid U-joint 2 1/2"  X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.

[1] 1350 Rear Transfer Case Output Shaft Flange Yoke.

[1] 1350 Rear Dana 44 Pinion Yoke.

[1] Set of 1350 U-bolts.

[1] Set of 4 CV Bolts.