2007-2017 Jeep Wrangler JK AWD/4WD SEVERE Duty 0-6” Lift Front Driveshaft 1350 Series

*Made-To-Order* 2-5 Day Build Time.

Conversion style shaft, 0-6" lift. 1350 Series

1350 conversion custom, default kit at 36.5" flange to flange but can changed if needed. 2.5-0.95 tubing

Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 6” Lift.

***If over 6” lift: Once order is placed Front Differential and Transfer Case Yokes will be shipped to you for measurements. Must measure from center of new differential yoke to flat of new transfer case yoke for both front and rear driveshafts. Once measurements are sent to Sales@ECDriveline.com, driveshafts will be made and shipped within 24 Hours. 

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

These Severe Duty Solid 1350 CV Driveshaft will work up to 44" Tall Tires.

This Item will include the following parts:

[1] 1350 Solid U-joint 2 1/2"  X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.

[[1] 1350 Front Transfer Case Output Shaft Yoke.

[1] 1350 Front Dana 44 Pinion Yoke.

[1] Set of 1350 U-bolts.

[1] Set of 4 CV Bolts.